 |
 |
 |
|
This very powerful pneumatically (air powered) powered drum top
vacuum is designed for safe recovery of FLAMMABLE LIQUIDS including
gasoline, diesel, JP-4 and JP-5 Jet Fuels and non-combustible liquids.
With no moving parts makes it virtually maintenance free.
APPLICATIONS: Ideal for cleanup of fuel spills around taxiways, fueling areas, tank farms and hangars. Also can be used for general wet/dry cleanup of non-flammable materials.
- Compressed air powered, non-electric, no spark hazards. Venturi effect generates vacuum power.
- All components are static-conductive and bonded. Chemically resistant to most fuels.
- Meets GSA specifications for NSN-7910-00-632-9840 Vacuum Cleaner, Pneumatic.
- Meets NFPA Standard 30 for storage vessels for flammable liquids.
- Liquid recover rates over 1 gallon per second
- Comes
with drum and standard tool kit including 25' x 1.5" static-conductive
hose, fuel resistant vacuum hose with adapter, two-bend floor wand,
squeegee floor tool, and crevice tool.
- Quiet, below 80 decibels. Meets OSHA standards.
- Automatic cutoff to prevent overfilling.
- Integral flame arrestor.
- Safety features:
Buna-N gasketing and vacuum hose, grounding lug and anti-sparking inlet,
integral flame arrestor, cover hold-down clamps, grounding strap, snap
closure inlet. Components static-conductive and bonded, chemically
resistant to most fuels.
SPECIFICATIONS
Weight without tool/hose 150 lbs (68 kg)
Noise level below 80 dbA, meets OSHA standards
Container size 55 gallon drum with 2" drain valve
Automatic liquid cutoff to prevent overfilling
Carbon steel design
Finish: 2-part epoxy, safety red & yellow
Wheels: Four 4" swivel casters, static conductive, with 2 locking
Recovery rates: over 1 gallon per second (4 liters/sec)
Inlet size: stainless steel 1.5" (38mm) with snap closure
Compressed air powered single jet venturi with variable orifice
Compressed air required: 35 SCFM at 60 PSIG at vacuum inlet
Compressor required: 10 HP minimum (compressor not included)
Compressed air connection: 1/2-inch NPTM fitting
Overall height 45"
Minimum width (90 degrees from clamps) 24"
Maximum width (across clamps) 28"
- Compressed air powered, non-electric, no spark hazards. Venturi effect generates vacuum power.
- All components are static-conductive and bonded. Chemically resistant to most fuels.
- Meets GSA specifications for NSN-7910-00-632-9840 Vacuum Cleaner, Pneumatic.
- Meets NFPA Standard 30 for storage vessels for flammable liquids.
SPECIFICATIONSWeight without tool/hose 150 lbs (68 kg) Noise level below 80 dbA, meets OSHA standards Container size 55 gallon drum with 2" drain valve Automatic liquid cutoff to prevent overfilling Carbon steel design Finish: 2-part epoxy, safety red & yellow Wheels: Four 4" swivel casters, static conductive, with 2 locking Recovery rates: over 1 gallon per second (4 liters/sec) Inlet size: stainless steel 1.5" (38mm) with snap closure Compressed air powered single jet venturi with variable orifice Compressed air required: 35 SCFM at 60 PSIG at vacuum inlet Compressor required: 10 HP minimum (compressor not included) Compressed air connection: 1/2-inch NPTM fitting Overall height 45" Minimum width (90 degrees from clamps) 24" Maximum width (across clamps) 28"
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
This very powerful pneumatically (air powered) powered drum top
vacuum designed for safe recovery of FLAMMABLE LIQUIDS including
gasoline, diesel, JP-4 and JP-5 Jet Fuels and non-combustible liquids.
With no moving parts makes it virtually maintenance free.
APPLICATIONS: Ideal for cleanup of fuel spills around taxiways,
fueling areas, tank farms and hangars. Also can be used for general
wet/dry cleanup of non-flammable materials.
- Compressed air powered, non-electric, no spark hazards. Venturi effect generates vacuum power.
- All components are static-conductive and bonded. Chemically resistant to most fuels.
- Meets GSA specifications for NSN-7910-00-632-9840 Vacuum Cleaner, Pneumatic.
- Meets NFPA Standard 30 for storage vessels for flammable liquids.
- Liquid recover rates over 1 gallon per second
- Comes
with drum and standard tool kit including 25' x 1.5" static-conductive
hose, fuel resistant vacuum hose with adapter, two-bend floor wand,
squeegee floor tool, and crevice tool.
- Quiet, below 80 decibels. Meets OSHA standards.
- Automatic cutoff to prevent overfilling.
- Integral flame arrestor.
- Safety features:
Buna-N gasketing and vacuum hose, grounding lug and anti-sparking inlet,
integral flame arrestor, cover hold-down clamps, grounding strap, snap
closure inlet. Components static-conductive and bonded, chemically
resistant to most fuels.
Ideal
SPECIFICATIONS
Weight without tool/hose 150 lbs (68 kg)
Noise level below 80 dbA, meets OSHA standards
Container size 55 gallon drum with 2" drain valve
Automatic liquid cutoff to prevent overfilling
Carbon steel design
Finish: 2-part epoxy, safety red & yellow
Wheels: Four 4" swivel casters, static conductive, with 2 locking
Recovery rates: over 1 gallon per second (4 liters/sec)
Inlet size: stainless steel 1.5" (38mm) with snap closure
Compressed air powered single jet venturi with variable orifice
Compressed air required: 35 SCFM at 60 PSIG at vacuum inlet
Compressor required: 10 HP minimum (compressor not included)
Compressed air connection: 1/2-inch NPTM fitting
Overall height 45"
Minimum width (90 degrees from clamps) 24"
Maximum width (across clamps) 28"
|
|
|
|
|
|
|
Cart