|
|
|
|
|
|
HEPA Filter #40181 - For SQ, Turbo, Attix, Aero Vacs
|
List Price: $130.34
Our Price: $123.34
You Save $7.00!
|
|
|
HEPA filter. Filters 99.97% of all particles down to and including 0.3 microns. Meets OSHA, EPA and DOD standards. Fits Wap SQ 10, 15, 17, EC10, Attix 8 & 12 vacs, Turbo and Aero model vacs. Does not fit SQ 23 or Attix 23 models. Measures OD 7", ID 5.5", H 5.5". Note: If you have a Turbo or SQ vacuum, or Attix 19 or Drum Top vacuum, that was not originally fitted for a HEPA filter, you will also need to order part #11762, Filter Holder Disk, to use with the HEPA filter. This part is available online under Filters section. Aero vacuums do not require adaptor for this filter.
For the HEPA filter for the Attix 12, 19 and Drum Top models with the XtremeClean self-cleaning filter system, use filter #302001134 (since the XtremeClean filters are larger in design, they require this larger HEPA filter).
|
|
|
|
|
|
|
|
|
|
|
|
|
Animal Grooming Set #6095
|
List Price: $149.20
Our Price: $108.18
You Save $41.02!
|
|
|
Hook up the Animal Grooming Set to any of the wet/dry vacuums to make the perfect vacuum for grooming dogs, cats, horses, or other animals.
The Super Quiet (SQ) design (only 57 decibels, the quietest wet/dry vacuum available in the world) of the wet/dry vacuums make them ideal for limiting noise exposure around animals to avoid scaring them. We recommend the Attix 8 Basic Super Quiet Wet/Dry Vacuum, but you can connect the Animal Grooming Set to any vacuum.
The Animal Grooming Set's combs are ideal for a variety of types of animal hair. They connect directly to the vacuum hose so that hair is immediately sucked-up.
The set includes:
-11 foot long, 1 inch diameter vacuum suction hose (crush resistant)
-One Spiked Currycomb
-One Currycomb
-One Brush Currycomb
The pieces of the Animal Grooming Set can be ordered separately, combined, or with a vacuum you already have that has a 1" connection (which is standard on many home vacuums).
|
|
|
|
|
|
|
|
|
|
|
|
|
Paper filter, #11753 for Aero, Turbo XL, Turbo 10, Stihl (SE-100), SQ14 models
|
List Price: $39.95
Our Price: $34.95
You Save $5.00!
|
|
|
Filter cartridge made of paper material with high 1.0 micron filtration rate. Fits Aero models (including Aero 400, 440, 600, 640, 800A, 840A, Aero II), ST 7 gallon, ST 25, ST 35E, ST 10 (dome), ST 20 (dome), Turbo XL vacuums, Turbo 10 vacuums, Turbo E vacuums, Stihl (SE-100) and SQ 14 (550 model) vacuums. Measures OD 7", ID 5.5", H 5.5". Note, for Aero 7 (model 300) and Aero 9 (models 500, 700a ) use filter #29991.
If you want a more durable filter, you may also want to try the 302000490 Fleece Filter or the 100054 Heavy Duty Filter. Both of these filters are washable and measure the same size as the 11753 paper filter and will fit in place of the 11753. To see these filters, please enter their number in the TOP LEFT corner SEARCH bar and hit "GO."
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy Duty filter, #100054, for SQ/Aero/Turbo/Attix vacs
|
List Price: $84.81
Our Price: $78.79
You Save $6.02!
|
|
|
Filter cartridge made of heavy duty fleece material enclosed with wire mesh with high 1.0 micron filtration rate. Wire mesh over filter helps to protect filter. Fits SQ, Aero, Attix, and Turbo models. Can be cleaned by washing or blowing out. Measures OD 7", ID 5.5", H 5.5". Note: If you have a Turbo or SQ vacuum or Attix 19 gallon vacuum that was not originally fitted for a heavy duty filter, you will also need to order part #11762, Filter Disk, to use with the filter. This part is available online under Filters section.
|
|
|
|
|
|
|
|
|
|
|
|
|
Paper filter, #29991 for Aero 300/500/700/Aero 9 and Turbo 6 Models
|
List Price: $61.33
Our Price: $57.33
You Save $4.00!
|
|
|
Filter cartridge with high 1.0 micron filtration rate. Fits Aero 300, Aero 9 gallon model, Aero 500, Aero 700A models and the Turbo 6 model.
|
|
|
|
|
|
|
|
|
|
|
|
|
HEPA Filter #11618 - Long HEPA filter for Turbo 13 Models
|
List Price: $301.07
Our Price: $279.95
You Save $21.12!
|
|
|
HEPA filter. Filters 99.97% of all particles down to and including 0.3 microns. Meets OSHA, EPA and DOD standards. Fits Wap Turbo 13 models with the Long style filter. Measures OD 7", ID 5.5", H 9".
|
|
|
|
|
|
|
|
|
|
|
|
|
#60897, 1.25" x 6' Suction Hose Complete, anti-static, for Aero Models
|
List Price: $55.76
Our Price: $46.76
You Save $9.00!
|
|
|
#60897, 1.25" x 6' Suction Hose Complete, anti-static, for Aero Models. Complete hose includes suction swivel connector at vacuum inlet. (Note: this suction hose fits snugly into the vacuum. It does not latch on. Some older model Aero vacuums had latching connections for suction hose at vacuum inlet, but the latching hose is no longer made.)
For Aero curved plastic wand handle, order part #60911 under Wands section of parts and accessories.
For Aero two piece plastic straight wand extension (part which goes between curved wand and floor), order part #40696 under Wands section of parts and accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
1.25" x 16' Suction Hose, anti-static, complete
|
List Price: $144.43
Our Price: $123.43
You Save $21.00!
|
|
|
1.25" x 16' Suction Hose, anti-static, complete. Hose crush resistant, high quality. Complete hose includes suction swivel connector at vacuum inlet and connector to attach into curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
1.5" x 10 Suction Hose, Complete
|
List Price: $68.67
Our Price: $59.40
You Save $9.27!
|
|
|
1.5" x 10' Suction Hose, complete. Hose crush resistant, high quality. Complete hose includes suction swivel connector at vacuum inlet and connector to attach into curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
1.5" x 13 Suction Hose, Complete
|
List Price: $83.48
Our Price: $75.48
You Save $8.00!
|
|
|
1.5" x 13' Suction Hose, complete. Hose crush resistant, high quality. Complete hose includes suction swivel connector at vacuum inlet and connector to attach into curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.5" Suction Hose by the foot
|
List Price: $5.30
Our Price: $3.95
You Save $1.35!
|
|
|
1.5" Suction Hose, by the foot. Hose crush resistant, high quality. DOES NOT include suction swivel connector (part #15102) at vacuum inlet and connector cuff (part #11597) to attach into curved wand. Must order those separately. You must specify quantity in feet (i.e. quantity 30 = 30 feet).
|
|
|
|
|
|
|
|
|
|
|
|
|
Swivel for 1.5" suction hose
|
List Price: $8.68
Our Price: $6.97
You Save $1.71!
|
|
|
Swivel connector to connect 1.5" vacuum suction hose to vacuum inlet (which is 2"). Note: the actual inlet size on Wap/Attix/Turbo/SQ/Aero vacuums is closer to 2.25", but the inlet is simply termed a 2" inlet into the vacuum. It gets confusing, but this will work for you!
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuff for 1.5" suction hose
|
List Price: $12.24
Our Price: $10.95
You Save $1.29!
|
|
|
Cuff connector to connect end of 1.5" vacuum suction hose to curved wand or accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hose connector for 1.5" hose
|
List Price: $19.12
Our Price: $15.95
You Save $3.17!
|
|
|
Connects two pieces of 1.5" suction hose together. Designed with swivel for maximum mobility with the hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
2" x 13 Suction Hose, Complete
|
List Price: $74.60
Our Price: $63.95
You Save $10.65!
|
|
|
2" x 13' Suction Hose, complete. Hose crush resistant, high quality. Complete hose includes suction swivel connector at vacuum inlet and connector to attach into 2" hand tools. Ideal sized hose for picking up large chunky debris, rocks, etc at construction sites. May want to use with 2" rubber nozzle (see nozzle part #7868).
|
|
|
|
|
|
|
|
|
|
|
|
|
2" to 1.5" Cuff Reducer for Suction Hose to connect to 2" hose to 1.5" curved metal wand
|
List Price: $12.40
Our Price: $10.95
You Save $1.45!
|
|
|
2" to 1.5" Reducer for Suction Hose to connect to 2" hose to 1.5" curved metal wand handle (part #30200447). See wand section to order curved metal wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
#14682, Cuff connects 1.25" suction hose to 1.5" accessories
|
List Price: $10.18
Our Price: $8.13
You Save $2.05!
|
|
|
#14682. Cuff connects 1.25" suction hose to 1.5" accessories. This cuff screws onto the far end of a 1.25" diameter hose so you can connect it to the metal curved wand handle, a hand brush, crevice tool, etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
#60911, 1.5" Plastic Curved Wand for Aero models
|
List Price: $13.36
Our Price: $10.36
You Save $3.00!
|
|
|
#60911, 1.5" Plastic curved wand for Aero models. Connects to 2 piece plastic straight extension wand (see part #40696 under Wand section). For Aero suction hose, see part #60897 under Hoses section.
|
|
|
|
|
|
|
|
|
|
|
|
|
#40696, 1.5" Plastic Straight Wand, 2 piece for Aero models
|
List Price: $17.00
Our Price: $14.95
You Save $2.05!
|
|
|
#40696, 1.5" Plastic Straight Wand, 2 piece, for Aero models. Connects to curved plastic wand handle (see part #60911 under Wands section).
For Aero suction hose, see part #60897 under Hoses section.
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal Nozzle #14295
|
List Price: $7.21
Our Price: $5.98
You Save $1.23!
|
|
|
Plastic 4.5" nozzle for cleaning small surfaces. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Univeral Nozzle, 6" metal, #5145
|
List Price: $41.92
Our Price: $34.95
You Save $6.97!
|
|
|
Univeral Nozzle, 6" metal, #5145. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brush Nozzle, 9" plastic, #6086
|
List Price: $12.18
Our Price: $9.98
You Save $2.20!
|
|
|
Brush Nozzle, 9" plastic, #6086. Nylon bristles for cleaning upholstery and furniture. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brush Nozzle, plastic 3" rectangular, #5146
|
List Price: $11.23
Our Price: $9.98
You Save $1.25!
|
|
|
Brush Nozzle, plastic 3" rectangular, #5146, soft nylon bristles for delicate surfaces. Connects to any 1.5" straight or curved wand. THIS MAKES A GREAT DUSTING BRUSH AROUND THE HOME!!
|
|
|
|
|
|
|
|
|
|
|
|
|
Radiator Brush #5144
|
List Price: $13.57
Our Price: $11.49
You Save $2.08!
|
|
|
Radiator Brush #5144, bristles for cleaning radiators or pipes. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Crevice Tool 1.5" x 12" plastic #6084
|
List Price: $5.30
Our Price: $4.30
You Save $1.00!
|
|
|
Crevice Tool 1.5" x 12" plastic #6084 for cleaning hard to reach places. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crevice Tool 1.5" x 16" plastic #100387
|
List Price: $13.82
Our Price: $11.49
You Save $2.33!
|
|
|
Crevice Tool 1.5" x 16" plastic #100387 for cleaning hard to reach places. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Chip Nozzle 1.5" x 6" rubber #5067
|
List Price: $10.81
Our Price: $8.95
You Save $1.86!
|
|
|
Chip Nozzle 1.5" x 6" rubber #5067 for cleaning metal shavings or chips. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Chip Nozzle 2" x 6" rubber #7868
|
List Price: $62.29
Our Price: $42.29
You Save $20.00!
|
|
|
Chip Nozzle 2" x 6" rubber #7868 for cleaning metal shavings or chips. Connects to any 2" hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
Car Claw Nozzle #100022 for cleaning under car seats
|
List Price: $14.35
Our Price: $12.95
You Save $1.40!
|
|
|
Claw Nozzle # for cleaning under car seats. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood Floor Brush Nozzle #64195
|
List Price: $40.49
Our Price: $34.95
You Save $5.54!
|
|
|
Wood Floor Brush Nozzle #64195. Made of heavy duty plastic, with resiliant horse hair brush bottom, perfect for use on wood floors to avoid scratch marks. Attaches to any 1.5" diameter wand. Also works very well on concrete, tile, linoleum floors, and low-pile carpet. The brush slides over the surface of the floor to distract the dust for easy pickup by the vacuum.
|
|
|
|
|
|
|
|
|
|
|
|
|
Combi Floor Nozzle, 11", #8046
|
List Price: $54.87
Our Price: $49.49
You Save $5.38!
|
|
|
Combi Floor Nozzle, 11", #8046. Plastic tool, adjustable for carpet or hard wood floors. This is the wand that comes standard with Attix 8 vacuums and Attix 12 basic vacuum. Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aero Floor Nozzle, #62352
|
List Price: $24.69
Our Price: $19.95
You Save $4.74!
|
|
|
Aero Floor Nozzle, #62352. Made of plastic. This is the nozzle that comes standard with Aero vacuums.
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Floor Nozzle, 13.5", #5147, with replaceable brush insert
|
List Price: $126.87
Our Price: $104.87
You Save $22.00!
|
|
|
Metal Floor Nozzle, 13.5", #5147, with replaceable brush insert. Made of aluminum. Brush insert replaceable (see part #6521 for brush only). Connects to any 1.5" straight or curved wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brush Insert #6521 for Metal Floor Nozzle #5147
|
List Price: $31.17
Our Price: $25.17
You Save $6.00!
|
|
|
This part replaces the Brush Insert #6521 for Metal Floor Nozzle #5147.
|
|
|
|
|
|
|
|
|
|
|
|
|
Filter Holder Disk #11762
|
List Price: $21.48
Our Price: $18.48
You Save $3.00!
|
|
|
Filter Holder Disk #11762. Screws onto bottom of filter to hold filter in place. Fits all Aero filters, Heavy Duty filters, and HEPA filters (see part #29753 for other disc for all other types of filters).
|
|
|
|
|
|
|
|
|
|
|
|
|
Filter Holder Disk #29753
|
List Price: $22.60
Our Price: $19.48
You Save $3.12!
|
|
|
Filter Holder Disk #29753. Screws onto bottom of filter to hold 4.5" Height filter in place. Fits all models except Aero filter, Heavy Duty filter, and HEPA filter (see part #11762 for disc for Aero, Heavy Duty and HEPA filters).
|
|
|
|
|
|
