|
|
|
|
|
|
#302000382, Tube Fastener
|
List Price: $2.95
Our Price: $2.05
You Save $0.90!
|
|
|
#302000382, Tube Fastener. This part goes at the rear of the handle on the Attix 12 models, to connect the metal wand tube onto the back of the vacuum.
|
|
|
|
|
|
|
|
|
|
|
|
|
#40696, 1.5" Plastic Straight Wand, 2 piece for Aero models
|
List Price: $17.00
Our Price: $14.95
You Save $2.05!
|
|
|
#40696, 1.5" Plastic Straight Wand, 2 piece, for Aero models. Connects to curved plastic wand handle (see part #60911 under Wands section).
For Aero suction hose, see part #60897 under Hoses section.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#60609, Wand Holder, Aero 400/800 A, Attix models
|
List Price: $10.82
Our Price: $7.98
You Save $2.84!
|
|
|
#60609, Wand Holder, Aero 400/800 A, Attix vacuums. Circular piece that goes around the metal wand to allow it to attach onto vacuum canister.
|
|
|
|
|
|
|
|
|
|
|
|
|
#60911, 1.5" Plastic Curved Wand for Aero models
|
List Price: $13.36
Our Price: $10.36
You Save $3.00!
|
|
|
#60911, 1.5" Plastic curved wand for Aero models. Connects to 2 piece plastic straight extension wand (see part #40696 under Wand section). For Aero suction hose, see part #60897 under Hoses section.
|
|
|
|
|
|
|
|
|
|
|
|
|
1.5" Metal Wand, 2 piece #15546, Stainless
|
List Price: $74.83
Our Price: $64.83
You Save $10.00!
|
|
|
1.5" Metal Wand, 2 piece #15546. Made of stainless steel. Connects to curved metal wand handle (see part #302000447).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.5" Metal Wand, 2 piece #302000478, Aluminum
|
List Price: $35.80
Our Price: $29.95
You Save $5.85!
|
|
|
1.5" Metal Wand, 2 piece #302000478. Made of aluminum. Connects to curved metal wand handle (see part #302000447). NOTE: This aluminum 2 piece wand is NOT what ships standardly with vacuums. The standard wand is #15546, made of stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Curved Wand #302000447 w/ Quick Connect
|
List Price: $23.63
Our Price: $18.63
You Save $5.00!
|
|
|
Metal Curved Wand #30200447 with Quick Connect fitting for Attix model vacuums. Curved metal wand goes between the end of the suction hose and straight 2 piece metal wand (see part #15546). Note how the quick connect wand has a black plastic fitting at its near end; this is part of the quick connect. Old style rubberized cuffs at the far end of the hose can fit over this plastic piece, but it is a very tight fit. For new quick connect cuff, see below.
Note: This #302000447 curved wand has the new-style quick-connect fitting to connect the suction hose to the wand. For older style SQ and Turbo model vacuums without the quick-connect fitting, use wand #46691 (formerly wand #5103). Enter this number in the top left corner search bar on this web page and hit GO.
If you need the cuff only that screws onto the far end of the hose to attach to the near end of the Quick Connect Wand, enter 3020001345 or 46690 in the top left corner search bar and hit GO. These are the two different types of Quick Connect Cuffs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Curved Wand #46691(formerly #5103)
|
List Price: $47.59
Our Price: $39.95
You Save $7.64!
|
|
|
Metal Curved Wand #46691 (formerly #5103) for SQ and Turbo model vacuums. Curved metal wand goes between the end of the suction hose and straight 2 piece metal wand (see part #15546). Note: This #46691 curved wand does NOT have the new-style quick-connect fitting that is used on the Attix model vacuums. For the metal curved wand with quick-connect fitting, use part #302000447.
|
|
|
|
|
|
|
